Identify and unpack each of the system components

Layout all equipment and compare to packing list.

 

 

 

 

Place chargers by cash registers with appropriate power supplies

 

 

Place guest coaster tags on charger and plug in.

Coaster Tags may need up to 3 hours to get back to a full charge depending on transit time to the location.

 

 

 

 

Unpack reader and PC

The reader will connect via Ethernet cable directly to the Vuze PC in most installations.  On occasion, the reader will be connected to a local network.  In these scenarios, consult with the on site IT contact for which Ethernet port should be used.

Both devices require standard 110V power outlets and should be plugged into properly rated surge protection devices (not included).

The location of the PC will be designated by the on site management.   The reader should be placed near the PC at a minimum of 4 feet above the ground with the antenna facing up when available.

HME does not supply or mount PC's onto wall mounts during installation.  Mounting PC's is done solely at the discretion and risk of the customer.

 

 

 

 

 

Place all Reference tags for initial testing

In the box, HME has supplied a map designating each of the reference tag locations in the restaurant.  Each tag is labeled with a letter sticker that corresponds with a location on the map.  Additionally, a second letter sticker has been provided to be placed on the table (typically the leg) as a marker to show where the tag has been installed, more on this during the mounting of tags portion of this post.

 

 

 

 

SYSTEM STAGING IS COMPLETE.

DO NOT MOUNT REFERENCE TAGS AT THIS POINT. INITIAL TESTING MUST BE COMPLETED FIRST.